DBK Instruments
Jogeshwari East Mumbai, Maharashtra
GST No. 27AACFD0425G1ZY
Call 0794262661780% Response Rate
Send Enquiry
Analytical Instrument
We are one of the leading manufacturers of Analytical Instrument.
Wrist Action Shaker
Get Best Quote
Rs 43000 / PiecePrice on Request
| Minimum Order Quantity | 1 Piece |
| Clamp capacity | 12 clamps |
| Flask size | 100-1000 ml |
| Speed range | 40-300 rpm |
| Speed control | Digital |
| Operation mode | Timer |
| Frequency | 50 Hz |
| Movement Type | Wrist Action |
| Display Type | Digital |
| Operation Type | Timed Operation |
| Voltage | 220 V |
The Wrist Action Shaker or Griffin Flask Shaker is used for clinical and chemical investigations or in micro biological research to mix several flask at once with high reproducible results. It has an electrically driven motor house in M.S. body duly powder coated, with two side arm fitted with suitable clamps to hold the flask. It has the following features:
Features:
•No. of Flask: 4 and 8
•Speed: Upto 300 oscillations per minute
•Dimension: (330 +400 mm) W x 310 mm D x 250 mm H
•Weight: 14 kg + 2 kg clamps
Features:
•No. of Flask: 4 and 8
•Speed: Upto 300 oscillations per minute
•Dimension: (330 +400 mm) W x 310 mm D x 250 mm H
•Weight: 14 kg + 2 kg clamps
View Complete details
Yes! I am InterestedRequest a call back
Programmable Melting Point Apparatus
Get Best Quote
Rs 49000 / PiecePrice on Request
| Minimum Order Quantity | 1 Piece |
| Operation Type | Digital |
| Sample Capacity | 3 capillaries |
| Temperature Range | Ambient–300°C |
| Temperature Accuracy | ±0.1°C |
| Display Type | TFT |
| Heating Source | Electrical |
| Power Consumption | 200 W |
| Automation Features | Auto Cooling |
| Country of Origin | Made in India |
| Voltage | 220V |
Oil-less Digital Programmable Rate Melting Point Apparatus is designed to determine the melting point, boiling point or flow point of a substance. Three samples can be observed in the heating bath and the adjustable magnifying lens enhances the measuring accuracy by providing the user with best possible view of capillaries. Solid state electronic circuitry is used to give precise control over the entire temperature range. Sensitive PT-100 Temperature sensor is used, which responds to temperature changes more rapidly and hence melting point determination is performed faster. Provision to set PRE TEMP limit to approximately 15°C. below the expected Melting Temperature of the sample. Selection of rate of heating result in accurate determination of Melting Point. Hold Temperature Switch is provided to hold the temperature in programmable mode. The product has the following features:
Product Details:
Product Details:
- Display: Digital 12 mm red LED
- Temperature Range: Up to 300°C
- Resolution: 1°C
- Rate of heating: 0.5, 1, 2, 5°C selectable after reaching preset temperature
- Stirrer: Magnetic with teflon coated bit
- Viewing: through magnifying glass, background illuminated
- Bath: 100 ml oil bath with level marking
- Sensor: RTD (PT-100) Temperature Sensor
- Hold: Facility to hold temp
- Sample: Capillaries 2 Nos. for melting Point, Mini Test Tube 1 No. for Boiling Point
- Dimension: 300 mm W x 220 mm D x 260 mm H
- Weight: 5 kg approximately
View Complete details
Yes! I am InterestedRequest a call back
Programmable Melting Point Apparatus
Get Best Quote
Rs 51000 / PiecePrice on Request
| Minimum Order Quantity | 1 Piece |
| Operation Type | Semi Automatic |
| Sample Capacity | 3 capillaries |
| Temperature Range | Ambient–300°C |
| Temperature Accuracy | ±0.1°C |
| Display Type | TFT |
| Heating Source | Silicon Oil Bath |
| Power Consumption | 200 W |
| Country of Origin | Made in India |
| Voltage | 230 V |
| Usage/Application | Lab |
In order to outfit the numerous wants and requirements of our valuable customers, we are highly indulged in presenting a top quality of Programmable Melting Point Apparatus.
Features:
Oil Bath Digital Programmable Rate Melting Point Apparatus is designed to determine the melting point, boiling point or flow point of a substance. Three samples can be observed in the heating bath and the adjustable magnifying lens enhances the measuring accuracy by providing the user with best possible view of capillaries. Solid state electronic circuitry is used to give precise control over the entire temperature range. Sensitive PT-100 Temperature sensor is used, which responds to temperature changes more rapidly, and hence melting point determination is performed faster. Provision to set primary temperature limit to approximately 15°C below the expected melting temperature of the sample. Selection of rate of heating result in accurate determination of melting point. Hold Temperature Switch is provided to hold the temperature in programmable mode. It has the following features:
Product Details:
• Display: Digital 12 mm Red LED
• Temperature Range: up to 320°C
• Resolution : 1°C
• Rate of heating : 0.5, 1, 2, 5°C selectable after reaching preset temp
• Temperature Sensor : RTD (PT-100) Temperature sensor.
• Sample: Capillary 1 No
• Dimension: 300 mm W x 220 mm D x 240 mm H
• Weight: 5 kg approximately
Features:
- Convenient to use
- Precisely designed
- Quality tested
- Optimum performance
- Seamless finish
Oil Bath Digital Programmable Rate Melting Point Apparatus is designed to determine the melting point, boiling point or flow point of a substance. Three samples can be observed in the heating bath and the adjustable magnifying lens enhances the measuring accuracy by providing the user with best possible view of capillaries. Solid state electronic circuitry is used to give precise control over the entire temperature range. Sensitive PT-100 Temperature sensor is used, which responds to temperature changes more rapidly, and hence melting point determination is performed faster. Provision to set primary temperature limit to approximately 15°C below the expected melting temperature of the sample. Selection of rate of heating result in accurate determination of melting point. Hold Temperature Switch is provided to hold the temperature in programmable mode. It has the following features:
Product Details:
• Display: Digital 12 mm Red LED
• Temperature Range: up to 320°C
• Resolution : 1°C
• Rate of heating : 0.5, 1, 2, 5°C selectable after reaching preset temp
• Temperature Sensor : RTD (PT-100) Temperature sensor.
• Sample: Capillary 1 No
• Dimension: 300 mm W x 220 mm D x 240 mm H
• Weight: 5 kg approximately
View Complete details
Yes! I am InterestedRequest a call back
Digital Colony Counter
Get Best Quote
Rs 10000 / PiecePrice on Request
| Minimum Order Quantity | 1 Piece |
| Display Type | Digital 4 Digit |
| Plate size | 100 mm |
| Type | Manual |
| Illumination | LED light |
| Magnification | 2X |
| Power supply | 230V AC |
| Model Name/Number | 10DCC01 |
| Usage/Application | Laboratory |
| Color | Blue |
| Counting mode | Manual pen |
DIGITAL COLONY COUNTER (10 DCC 01) HSN Code – 9031 8000, GST – 18% DBK COLONY COUNTER is ideal for rapid, accurate counting and recording of bacteria and mould colonies in biology, zoology, bacteriology, pathology laboratories or any place where colony counting is a regular routine. DBK Colony Counter grid is illuminated with LED lights with Intensity control for uniform cool-light illumination and is provided with a magnifying glass for ease of viewing. Special pen type probe allows marking on petri dish with an audio beep and counting simultaneously. Counting is registered on 4 digit resettable digital counter.Counter : 4 digit (9999 counts) resettable digital counter with audio beep at every count.Probe : Auto Marker Pen probe for marking and counting simultaneously. Petri dish : up to 100mm Diameter.Grid : Wolffuegel Grid plate. Illumination : Uniform glare free illumination by LED lights with Intensity control.Magnification : 100mm. diameter Magnifying Lens, 2.25 X magnification . Dimension : 250mm W x 255mm D x 100mm H.Accessories : Magnifying Glass, Marking Probe
View Complete details
Yes! I am InterestedRequest a call back
Flocculator Jar Test Apparatus
Get Best Quote
Rs 47000 / PiecePrice on Request
| Minimum Order Quantity | 1 Piece |
| Jar Capacity | 1 L |
| Stirrer Speed Range | 25–150 rpm |
| Speed Control | Stepless |
| Heating Type | Without heater |
| Display Type | LCD Display |
| Number Of Jars | 2 or 4 or 6 |
| Brand | DBK |
| Material | Mild Steel Powder Coated |
| Weight | 12 Kg |
| Model Name/Number | 30FLSXX |
FLOCCULATOR / JAR TEST APPARATUS
FEATURES
Continuous duty brush less electronic stepper motor, so no wear & tear, no maintenance.Timing Belt Driven mechanism gives synchronisation in all peddles. Ball bearings used in peddles holder ensure noise less, maintenance free, smooth operationSoft start facility avoids jerky movements and vibrations.Individual lifting of the shaft to adjust the required height without disturbing other stirrers.Lifting & Tilting mechanism for easy loading & unloading of glass jar.Digital Speed Control for the motor gives accurate RPM reading. Epoxy powder coated body for corrosion resistance.Compact design.
SPECIFICATIONS
RPM: Variable from 5 to 150 with accuracy of ±1RPMDisplay: Digital 12mm Red LED for RPM.Capacity: Suitable for 1000 ml. Paddles: Stirring paddles made of S.S. x 4 Nos./6 Nos.Paddle Size : 65mm length X 25mm Ht. Illumination: LED Lights.Digital Timer: 99Hr:59Min with Alarm to switch off the Stirring Dimension: D 260mm x H 560mm x W 730mm / 980mm.Power Supply: 230V. ±10% AC. 50Hz.Accessories: Stainless Steel Peddles.Optional : 1000ml. Jar for above.
Model : 2 Test / 4 Test / 6 Test
Type: Common Speed / Individual Speed
Programmable / Non Programmable
Beakers: Cylindrical Glass / Square Acrylic
Optional: Rear Illumination
FEATURES
Continuous duty brush less electronic stepper motor, so no wear & tear, no maintenance.Timing Belt Driven mechanism gives synchronisation in all peddles. Ball bearings used in peddles holder ensure noise less, maintenance free, smooth operationSoft start facility avoids jerky movements and vibrations.Individual lifting of the shaft to adjust the required height without disturbing other stirrers.Lifting & Tilting mechanism for easy loading & unloading of glass jar.Digital Speed Control for the motor gives accurate RPM reading. Epoxy powder coated body for corrosion resistance.Compact design.
SPECIFICATIONS
RPM: Variable from 5 to 150 with accuracy of ±1RPMDisplay: Digital 12mm Red LED for RPM.Capacity: Suitable for 1000 ml. Paddles: Stirring paddles made of S.S. x 4 Nos./6 Nos.Paddle Size : 65mm length X 25mm Ht. Illumination: LED Lights.Digital Timer: 99Hr:59Min with Alarm to switch off the Stirring Dimension: D 260mm x H 560mm x W 730mm / 980mm.Power Supply: 230V. ±10% AC. 50Hz.Accessories: Stainless Steel Peddles.Optional : 1000ml. Jar for above.
Model : 2 Test / 4 Test / 6 Test
Type: Common Speed / Individual Speed
Programmable / Non Programmable
Beakers: Cylindrical Glass / Square Acrylic
Optional: Rear Illumination
View Complete details
Yes! I am InterestedRequest a call back
Leak Test Apparatus
Get Best Quote
Rs 93000 / PiecePrice on Request
| Minimum Order Quantity | 1 Piece |
| Test Method | Vacuum Decay |
| Application | Blister Pack |
| Automation Grade | Automatic |
| Power Supply | 230 V AC; 50 Hz |
| Display Type | Digital |
| Chamber Material | Polycarbonate |
| Data Interface | No Interface |
| Country of Origin | Made in India |
| Material | Stainless Steel 304 |
| Dessicator | Transparent Polycarbonate, 300mm |
DBK - LEAK TEST APPARATUS (40 LTA 01)
HSN Code – 9027 8090, GST – 18%
DBK - LEAK TEST APPARATUS is ideal Instrument to check Blister packs, Strips for Leak Test. The old method of separate desiccators and Huge vacuum pump is replaced with this new Leak Test Apparatus in GMP Stainless Steel with Phenomenal compactness.
The Instrument is equipped with long lasting Vacuum pump which gives higher level of Vacuum in shortest possible time. Fully Transparent Polycarbonate vacuum desiccators sustains vacuum for long time. Transparent Plate is provided to keep the sample under the fluid. Adjustable Digital Vacuum Gauge is provided with Vacuum Setting to indicate vacuum level & cut off the Vacuum Pump. Digital 99min : 59 sec Pre-set Timer starts automatically after attaining the Set Vacuum level. This Vacuum Hold Time is to observe the sample for leakage. At the End of the Set Time, Timer gives audio visual Alarm to indicate end of the test & release Vacuum automatically.
FEATURES :
· Compact construction
· Long lasting vacuum pump
· Transparent Polycarbonate Vacuum Desiccators.
· Stainless Steel (GMP) construction
· Vacuum level up to -24” / -620mm Hg
SPECIFICATIONS :
Digital Vacuum Gauge with Controller
Dessicator Dia. : 300 mm
Rating : 230V 50Hz single
Vacuum Level : -24” / -620mm Hg
Preset Timer : Digital 99 Min: 59Sec
Dessicator : Polycarbonate
Body : Fully Stainless Steel
View Complete details
Yes! I am InterestedRequest a call back
Digital Cod Digester
Get Best Quote
Rs 42000 / PiecePrice on Request
| Minimum Order Quantity | 1 Piece |
| Model Name/Number | 30DHB11 |
| Hole Size | 38mm Dia X 80mm D |
| Display | Digital, LED |
| Material | Block Aluminum, Cabinet MS Powder coated |
| Usage/Application | Laboratory Use |
| Sensor | RTD PT-100 |
| Phase | Single phase |
| Color | President Blue |
| Control | PID Temp Controller |
| Sample Volume | 20ml each |
We being a distinguished business company are highly dynamic in providing to the industry a vast gamut of COD Digester.
Features:
The COD Digester is suitable for the COD method for monitoring wastewater influent and effluent, industrial process water, and more. This instrument is used by Pollution Control Labs. Outer cabinet is made of mild steel duly coated. Double wall construction with insulation for minimum heat losses increases the efficiency of the system. Aluminium Block with holes (Dimension 40mm dia. X 80mm depth) is used to hold 15 COD tubes. Aluminium Block is heated to maintain temperature up to 180°C. Solid state digital temperature controller, appropriate heater and insulation selection assure uniformity in all the samples. Selectable timer up to 120 min with alarm is provided to set the digestion period (Refluxing). After digestion, analyse the sample with either colorimetric or titrimetric method. The COD Digester has the following features:
Specifications:
Features:
- Superior finish
- Long lasting
- Customized options
- Exceptional quality
The COD Digester is suitable for the COD method for monitoring wastewater influent and effluent, industrial process water, and more. This instrument is used by Pollution Control Labs. Outer cabinet is made of mild steel duly coated. Double wall construction with insulation for minimum heat losses increases the efficiency of the system. Aluminium Block with holes (Dimension 40mm dia. X 80mm depth) is used to hold 15 COD tubes. Aluminium Block is heated to maintain temperature up to 180°C. Solid state digital temperature controller, appropriate heater and insulation selection assure uniformity in all the samples. Selectable timer up to 120 min with alarm is provided to set the digestion period (Refluxing). After digestion, analyse the sample with either colorimetric or titrimetric method. The COD Digester has the following features:
Specifications:
- Temperature Range: Above amb. to 180°C.
- Display: Digital 12 mm Red LED
- Temperature Control: Electronic Temperature Controller
- Sensors: PT-100
- Heating Range: 750 watts
- Dimension: 500 mm W x 270 mm D x 80 mm H
- Resolution: 0.1°C
- Hole size: 40 mm diameter x 80 mm depth
- Glass Tube: 38 mm diameter, 15 nos (5 x 3 rows)
- Sample volume: 20 ml each
View Complete details
Yes! I am InterestedRequest a call back
Rocking Platform Shaker
Get Best Quote
Rs 44000 / PiecePrice on Request
| Minimum Order Quantity | 1 Piece |
| Shaker type | Rocking |
| Platform size | 300x300 mm |
| Speed range | 10-80 rpm |
| Max load | 5 kg |
| Speed control | Digital |
| Operation mode | Cont + Timer |
| Frequency | 50 Hz |
| Operation Type | Continuous |
| Voltage | 220 V |
| Platform accessory | Sticky mat |
The Rocking Platform Shaker is used for clinical and chemical investigations or in microbiological research of gel staining, culture, aeration and bathing blotted membranes samples for uniform mixing or settling. There is an electrically driven motor house in M.S. body duly powder coated, with platform to hold petri dishes, tissue slides. The rocking action is controlled by variable speed regulator up to 100 strokes per minute. It has the following features:
Features:
•Speed: 10 to 100 strokes per minute adjustable
•Tray Size: 300 mm x 300 mm
•Rocking Angle: ±-10° from Horizontal (Fixed)
•Dimension: 320 mm W x 320 mm D x 260 mm H
Features:
•Speed: 10 to 100 strokes per minute adjustable
•Tray Size: 300 mm x 300 mm
•Rocking Angle: ±-10° from Horizontal (Fixed)
•Dimension: 320 mm W x 320 mm D x 260 mm H
View Complete details
Yes! I am InterestedRequest a call back
Multi Magnetic Stirrer Bath
Get Best Quote
Rs 120000 / PiecePrice on Request
| Minimum Order Quantity | 1 Piece |
| Country of Origin | Made in India |
| Usage/Application | Lab |
| Power Source | Electric |
| Voltage | 220V |
| Frequency | 50Hz |
| Surface Finish | Color Coated |
The Multi Magnetic Stirrer Bath is made up of stainless steel inner with Lid. Having working space 400 mm W x 380 mm D x 200 mm H. Temperature range amb. to 80.0°C. controlled by solid state electronic proportional temperature controller. PT-100 sensor is used for better accuracy. An optional circulator can be provided for uniformity of temperature in the bath. The multi magnetic stirrer is provided with individual electronic speed controller. It has the following features:
Features:
• Temperature Range: Above amb. to 80.0°C
• Temperature Control: Digital Temp Controller.
• Bath Material: Bath Inner made of S. S.
• Flask Capacity: 250 mI x 6 nos.
• Speed Control: Stepless speed control for magnetic stirrer from 200 to 1000 RPM Individual speed control.
Features:
• Temperature Range: Above amb. to 80.0°C
• Temperature Control: Digital Temp Controller.
• Bath Material: Bath Inner made of S. S.
• Flask Capacity: 250 mI x 6 nos.
• Speed Control: Stepless speed control for magnetic stirrer from 200 to 1000 RPM Individual speed control.
View Complete details
Yes! I am InterestedRequest a call back
Orbital Incubator Shaker
Get Best Quote
Rs 110000 / PiecePrice on Request
| Platform size | 400x400 mm |
| Speed range | 50-250 rpm |
| Max load | 5 kg |
| Orbit diameter | 25 mm |
| Speed control | Digital |
| Mount type | Bench top |
| Frequency | 50 Hz |
| Operation Type | Timed Operation |
| Display Type | Digital |
| Voltage | 220 V |
The Orbital Incubator Shaker is a orbital shaker under controlled temperature used for growing culture of micro organisms, tissue culture, fermentation studies and aging test. The body is made up of M.S. duly powder coated with acrylic viewing hood. The tray made up of S. S. Trays is interchangeable as per size and has a number of conical flasks. Air circulation and digital temperature controller are provided to maintain the temperature. Shaking speed is adjustable from 20 to 200 orbital strokes per minute. Orbit diameter is 25 mm It has the following features:
Features:
•Capacity: 250 ml x 9 Flasks
•Speed: 20 to 200 RPM adjustable
•Temperature: up to 60°C
•Orbit Diameter: 25 mm
Features:
•Capacity: 250 ml x 9 Flasks
•Speed: 20 to 200 RPM adjustable
•Temperature: up to 60°C
•Orbit Diameter: 25 mm
View Complete details
Yes! I am InterestedRequest a call back
Digital Melting Point Apparatus for Plastic
Get Best Quote
Rs 55000 / PiecePrice on Request
| Minimum Order Quantity | 1 Piece |
| Operation Type | Semi Automatic |
| Sample Capacity | Plastic Granules |
| Temperature Range | Ambient–400°C |
| Temperature Accuracy | ±0.2°C |
| Display Type | TFT |
| Heating Source | Electrical |
| Voltage | 230 V AC |
| Power Consumption | 200 W |
| Country of Origin | Made in India |
| Temp Range | 350 Deg Centigrade |
DBK SPECIAL PROG. OILLESS MELTING POINT APPARATUS (For Plastic Granules)
DBK PROG. OILLESS MELTING POINT APPARATUS is designed to determine the MELTING point of Crystalline Plastics particles or granule, accurately up to a maximum temp. of 360°C.
ONE sample can be observed in the heating block & adjustable magnifying lens enhances the measuring accuracy by providing the user with best possible view of sample.
SPECIFICATIONS
Temp. Range: Up to 300°C.
Temp. Setting : Pre -Temp. setting facility provided
Indication: Digital Red LED display.
Resolution: 1°C.
Rate of heating: 0.5 , 1 , 2 , 5 °C selectable after reaching preset temp.
Viewing: Through adjustable magnifying glass. Illuminated.
Sensor: RTD (PT-100) Temp. Sensor.
Hold: Facility to hold Temp.
Samples Holder: 20mm dia. Cup type with watch glass.
Sample: One at a time.
Power Supply: 230V AC. 50 Hz.
Dimension: 220 W X 230 D X 210mm Ht.
View Complete details
Yes! I am InterestedRequest a call back
Digital pH Meter
Get Best Quote
Rs 7900 / PiecePrice on Request
| Minimum Order Quantity | 1 Piece |
| Accuracy | ±0.01 pH |
| Meter Type | Benchtop |
| Calibration Points | 2 point |
| Temperature Comp | Manual |
| Usage/Application | Laboratory |
| Display Type | Red LED Display |
| Type Of Ph Meter | Table-Top |
| Resolution | 0.01 pH,1 mV |
| Type | Table-Top |
| Ph Range | 0-14 |
The DBK Digital pH Meter is a direct reading, two point calibration instrument and reads pH or mV on a digital Red LED display. It is used to measure acidity or alkalinity of a solution. DBK Digital pH Meter finds use in chemical, pharmaceutical, sugar, food, cosmetics, plating, water conditioning & waste water treatment and many other industries where pH monitoring is required. Suitable for potentiometric measurement with appropriate electrode. It has the following features:
Features:
Features:
- Display: Digital 12 mm Red LED
- Range: pH - 0.00 to 14.00 pH (mV : 0 to ± 1999 mV)
- Accuracy: ± 0.01 pH, ± 1 mV, ± 1 count
- Slope Adjustment: 80 to 120% at 25 °C
- Temperature Compensation: Manually adjustable setting on calibrated dial between 0°C to 100°C
- Input Impedance: >10^12 ???
- Electrode Connector: BNC type for Combined pH Electrode
- Dimension: 180 mm W x 180 mm D x 80 mm H
- Weight: 2.5 kg approximately
View Complete details
Yes! I am InterestedRequest a call back
Dry Bath Instrument
Get Best Quote
Rs 32500 / PiecePrice on Request
| Minimum Order Quantity | 1 Piece |
| Chamber Volume | 1 L |
| Temperature Range | 100 degree c |
| Display Type | Digital |
| Timer | Up to 99 Hrs |
| Number Of Holes | 48 |
| Block Tube Capacity | 5 ml |
| Capacity | 10.2Dia X 48 Holes |
| Automation Grade | Automatic |
| Material | Aluminum Block, Outer Case MS Powder coated |
| Power | 250 Watt |
We are leading manufacture of Dry Bath Instrument. Inner chamber is made of stainless steel and outer chamber made of mild steel duly coated. The bath is provided with motorised circulator for temperature uniformity. Solid state temperature controller is provided to control the temperature accurately inside the bath. Stainless steel lid is provided too. The Dry Bath, also known as a heating block, has the following features:
Features:
• Capacity: 20 Ltr
• Display: Digital 12 mm Red Led
• Temperature Range: Above amb. to 95°C
• Resolution: 0.1°C
• Bath Size: 450 mm W x 300 mm D x 200 mm H
• Heater: Electrical immersion
• Heater Rating: Up to 2 kW
Features:
• Capacity: 20 Ltr
• Display: Digital 12 mm Red Led
• Temperature Range: Above amb. to 95°C
• Resolution: 0.1°C
• Bath Size: 450 mm W x 300 mm D x 200 mm H
• Heater: Electrical immersion
• Heater Rating: Up to 2 kW
View Complete details
Yes! I am InterestedRequest a call back
Digital Tablet Disintegration Test Double Basket
Get Best Quote
Rs 67000 / PiecePrice on Request
| Minimum Order Quantity | 1 Piece |
| Basket Stations | 2 Station |
| Operation Mode | Digital |
| Bath Temp Range | 37-45 C |
| No Of Baskets | 2 Baskets |
| Material | MS Powder coated |
| Basket Stroke | 55 mm |
| Test Standard | IP, USP, BP |
| Brand | DBK |
| Temp Accuracy | +-0.2 C |
| Display Type | Red LED Display |
We are renowned manufacturers of accurate, sturdy, tested, and quality-checked equipment and instruments used in the pharmaceuticals industry, labs, institutes, auto related industries and more. Years of experience, high-quality products, and exemplary customer service make us a reliable choice. Take a look at our product range today.
Temperature controller with PT-100 sensor is used to control the temp of the acrylic water Bath of the Digital Tablet Disintegration Test Apparatus Double Basket With Bath. Digital displays are to indicate Bath Temperature as well as Beaker Temperature precisely. Microprocessor based digital timer of 99.59 Hr is provided to set the integration time. Acrylic water bath with arrangement to hold 1000nn1 glass beaker is provided for taking the disintegration media. A simple and unique arrangement of loading & unloading the basket makes it user friendly. At the end of the test both the baskets remain in the top position for easy access. It has the following features:
Features:
•No. of Basket: Double Basket (2 x 6 Test)
•Stroke: 50 mm approximately. 30 strokes / min
•Setting: 4 Digit, Up / Down tactile switches
•Temperature: Digital 5°C above amb. to 45.0°C accuracy ± 0.5°C
•Temperature Controller : Solid State Electronic Temperature controller.
•Timer: Microprocessor based preset timer 00.01 to 99.59 Hr. with alarm
•Display Bath: Digital 12 mm Red LED for time & temperature made up of thick clear acrylic
•Heater: 300 W x 200 D x 200mm H 350 Watts
•Sensor: Stainless Steel. PT-100 Sensor, 2 nos.
•Weight & Dimension: 375 mm W x 350 mm D x 550 mm H 22 kg approximately
Temperature controller with PT-100 sensor is used to control the temp of the acrylic water Bath of the Digital Tablet Disintegration Test Apparatus Double Basket With Bath. Digital displays are to indicate Bath Temperature as well as Beaker Temperature precisely. Microprocessor based digital timer of 99.59 Hr is provided to set the integration time. Acrylic water bath with arrangement to hold 1000nn1 glass beaker is provided for taking the disintegration media. A simple and unique arrangement of loading & unloading the basket makes it user friendly. At the end of the test both the baskets remain in the top position for easy access. It has the following features:
Features:
•No. of Basket: Double Basket (2 x 6 Test)
•Stroke: 50 mm approximately. 30 strokes / min
•Setting: 4 Digit, Up / Down tactile switches
•Temperature: Digital 5°C above amb. to 45.0°C accuracy ± 0.5°C
•Temperature Controller : Solid State Electronic Temperature controller.
•Timer: Microprocessor based preset timer 00.01 to 99.59 Hr. with alarm
•Display Bath: Digital 12 mm Red LED for time & temperature made up of thick clear acrylic
•Heater: 300 W x 200 D x 200mm H 350 Watts
•Sensor: Stainless Steel. PT-100 Sensor, 2 nos.
•Weight & Dimension: 375 mm W x 350 mm D x 550 mm H 22 kg approximately
View Complete details
Yes! I am InterestedRequest a call back
Six Range Digital Conductivity Meter
Get Best Quote
Rs 15000 / PiecePrice on Request
| Minimum Order Quantity | 1 Piece |
| Measuring range | 0-200 mS/cm |
| Accuracy | +-2 % |
| Cell constant | K=1.0 |
| Temp range | 0-100 C |
| Temp comp | Manual |
| Usage/Application | Laboratory |
| Conductivity | 1 micro to 199mili siemens |
| Model Name/Number | 10DCM01 |
| Display Type | Red LED Display |
| No. of ranges | 5 ranges |
Six Range Digital Conductivity Meter is a direct reading instrument and measures conductivity of solution or liquid directly in milli Siemens or micro Siemens. This meter finds use in chemical, pharmaceutical, food, water conditioning, beverage, agriculture, electroplating & many other industries. It has the following features:
Features:
•Display: Digital 12 mm Red LED
•Range: 6 ranges - 1.999 µ S to 199.9 milli S
•Accuracy: ± 1% of the scale, ± 1 count
•Cell Constant K: adjust. between 0.08 to 1.5
•Temperature Compensation: Manually adjustable setting on calibrated dial between 0°C to 100°C
•Frequency: Selectable 200 Hz / 2KHz Sine wave
•Dimension: 250 mm W x 220 mm D x 100 mm H
•Weight: 3.25 kg approximately
Features:
•Display: Digital 12 mm Red LED
•Range: 6 ranges - 1.999 µ S to 199.9 milli S
•Accuracy: ± 1% of the scale, ± 1 count
•Cell Constant K: adjust. between 0.08 to 1.5
•Temperature Compensation: Manually adjustable setting on calibrated dial between 0°C to 100°C
•Frequency: Selectable 200 Hz / 2KHz Sine wave
•Dimension: 250 mm W x 220 mm D x 100 mm H
•Weight: 3.25 kg approximately
View Complete details
Yes! I am InterestedRequest a call back
Digital Auto Programmable Rate Melting
Get Best Quote
Rs 53000 / PiecePrice on Request
| Country of Origin | Made in India |
| Usage/Application | Lab |
| Power Source | Electric |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Surface Finish | Color Coated |
We are renowned manufacturers of accurate, sturdy, tested, and quality-checked equipment and instruments used in the pharmaceuticals industry, labs, institutes, auto related industries and more. Years of experience, high-quality products, and exemplary customer service make us a reliable choice. Go through our product range today.
Digital Auto Programmable Rate Melting Point Apparatus is designed to determine the Melting point of a substance accurately. One sample can be tested in the heating block. Solid state electronic circuitry is used to give precise control over the entire temperature range. An electronic optical sensor is used to check the change in transparency of the sample whose melting point is to be determined. Sensitive PT-100 Temperature sensor is used to determine melting point faster. The initial set up is not required for this instrument as no liquid media is used, and hence this instrument is totally maintenance free. Provision to set Pre Temp limit to approximately 15°C. below the expected Melting Temperature of the sample. Selection of rate of heating result in accurate determination of Melting Point. The instrument automatically detects melting point and hold display reading with audio alarm. It has the following features:
Features:
Digital Auto Programmable Rate Melting Point Apparatus is designed to determine the Melting point of a substance accurately. One sample can be tested in the heating block. Solid state electronic circuitry is used to give precise control over the entire temperature range. An electronic optical sensor is used to check the change in transparency of the sample whose melting point is to be determined. Sensitive PT-100 Temperature sensor is used to determine melting point faster. The initial set up is not required for this instrument as no liquid media is used, and hence this instrument is totally maintenance free. Provision to set Pre Temp limit to approximately 15°C. below the expected Melting Temperature of the sample. Selection of rate of heating result in accurate determination of Melting Point. The instrument automatically detects melting point and hold display reading with audio alarm. It has the following features:
Features:
- Display: Digital 12 mm Red LED
- Temperature Range: up to 320°C
- Resolution: 1°C
- Rate of heating Temperature : 0.5 , 1 , 2 , 5 °C selectable after reaching preset temperature
- Temperature Sensor : RTD (PT-100) Temperature sensor.
- Sample: Capillary 1 No.
- Dimension: 300 mm W x 220 mm D x 240 mm H
- Weight: 5 kg approximately
View Complete details
Yes! I am InterestedRequest a call back
Auto Karl Fischer Titration Apparatus
Get Best Quote
Rs 65000 / PiecePrice on Request
| Minimum Order Quantity | 1 Piece |
| Method Type | Volumetric |
| Moisture Range | 10 ppm to 100 Percent |
| Control Type | Microprocessor |
| Usage/Application | Laboratory Use |
| Power Supply | 230V AC |
| Display Type | LCD |
| Model Name/Number | 10 KFT 04 |
| Dispensing Resolution | 0.01ml |
| End Point Confirmation Time | 1-2 Min |
| Water Content Measuring Range | 50ppm to 100% |
As per the high demand of clients, we are offering Auto Karl Fischer Titration Apparatus, which is developed in line with industry set standards.
Features:
The Digital Auto Dispensing Karl Fischer Titration Apparatus is easy to handle as less glass parts are used. Specially designed continuous duty positive displacement peristaltic pump is used to dispense reagent and menthol into reaction vessel. Reversing facility available to transfer the regent from the tubing back to reservoir. Digital readout to avoid human reading errors. DBK Karl Fischer Titrator finds used in chemical, pharmaceutical food, cosmetics, oil and many other industries in Q.C. and R & D laboratories. It has the following features:
Other Details:
Features:
- Accurate working
- Long service life
- Optimum finish
- As per the industry standards
- Less maintenance
The Digital Auto Dispensing Karl Fischer Titration Apparatus is easy to handle as less glass parts are used. Specially designed continuous duty positive displacement peristaltic pump is used to dispense reagent and menthol into reaction vessel. Reversing facility available to transfer the regent from the tubing back to reservoir. Digital readout to avoid human reading errors. DBK Karl Fischer Titrator finds used in chemical, pharmaceutical food, cosmetics, oil and many other industries in Q.C. and R & D laboratories. It has the following features:
Other Details:
- Titration Method: Volumetric
- Reagent Dispense: Peristaltic Pump with Silicone tubing
- Display: 12 mm Red LED display with 99.00 counts max
- Resolution: 0.01 count
- Accuracy: +/- 10 PPM (0.01%) for 25 gms of sample
- Electrode: Twin Platinum
- Vessel: Specially designed moisture tight reaction
- Stirrer: Moisturised, Teflon Coated Magnetic Stirrer
- End Point: Audio and Visual Alarm.
- Time Delay: 10 to 60 seconds adjustable
- Dimension: 300 mm W x 300 mm D x 300 mm H
- Weight: 6 kg (approximately)
View Complete details
Yes! I am InterestedRequest a call back
Digital Constant Temperature Circulating Bath
Get Best Quote
Rs 51000 / PiecePrice on Request
| Minimum Order Quantity | 1 Piece |
| Number Of Holes | 0 |
| Shape | Rectangular |
| Shaking Function | No |
| Material | Inner SS Outer MS Powder Coated |
| Wall Construction | Double Wall |
| Heating Element Type | Immersion Heater |
| Control Type | PID |
| Automation Grade | Automatic |
| Voltage | 230V |
| Automation Type | Manual |
The Digital Constant Temperature Circulating Bath has a double wall construction with glass wool insulation. Inner chamber is made of stainless steel and outer chamber is made of mild steel duly coated. The bath is provided with motorised circulator for uniform heating. Solid state temperature controller is provided to control the temperature accurately inside the bath. Stainless steel lid is also provided.
Features:
. Capacity: 27 ltr
. Display: Digital 12 mm Red LED
. Temp. Range: Above amb. to 95°C.
. Resolution: 0.1°C
. Bath Size: 450 mm W x 300 mm D x 200 mm H
. Heater: Electrical immersion.
. Heater Rating: Upto 2 Kw
Features:
. Capacity: 27 ltr
. Display: Digital 12 mm Red LED
. Temp. Range: Above amb. to 95°C.
. Resolution: 0.1°C
. Bath Size: 450 mm W x 300 mm D x 200 mm H
. Heater: Electrical immersion.
. Heater Rating: Upto 2 Kw
View Complete details
Yes! I am InterestedRequest a call back
2 In 1 Shaker
Get Best Quote
Rs 83000 / PiecePrice on Request
| Minimum Order Quantity | 1 Piece |
| Shaker type | Reciprocating |
| Platform size | 400x400 mm |
| Speed range | 20-200 rpm |
| Max load | 5 kg |
| Speed control | Digital |
| Operation mode | Timer |
| Model Name/Number | 30 TSR 01 |
| Power | 100 Watt |
| Weight | 30 Kg |
| Movement Type | Orbital OR Reciprocating |
The 2-in-1 Shaker or dual action shaker is a unique shaker in which orbital or reciprocating motion can be selected by snap action of the lever. This shaker is used for growing culture of micro organisms and tissue cells, fermentation studies and aging test in R & D labs. The body is made up of M.S. duly powder coated. The shaker tray is made up of S.S. with S.S. clamps for holding conical flasks. The trays are interchangeable as per number and size of conical flasks. A variable speed geared motor allows the shaking speed to be varied from 20 to 200 orbital strokes per minute. The orbit diameter OR reciprocating stroke is 25 mm It has the following features:
Specifications:
Specifications:
- Type: Dual action. Metabolic or Orbital motion. Selectable by lever.
- Capacity: 250m1. x 9 Flasks
- Speed: 20 to 200 RPM adjustable
- Orbit/Stroke: 25 mm
- Dimension: 480 mm W x 480 mm D x 220 mm H
View Complete details
Yes! I am InterestedRequest a call back
Tablet Friability Tester
Get Best Quote
Rs 47000 / PiecePrice on Request
| Minimum Order Quantity | 1 Piece |
| No. Of Drums | 2 Nos. |
| Automation Grade | Semi Automatic |
| Operation Mode | Microprocessor |
| Drum Diameter | 300 mm |
| Max Tablets Per Drum | 10 Tablet |
| Display Type | LED |
| Brand | DBK |
| Model Name/Number | 40FTA02 |
| Display | Digital LED Display |
| Weight | 7 Kg |
Display : 4 digit, 12mm Red LED.Rotation Speed : 25 RPM approx..Revolution : Adjustable 1 to 9999Switches : Tactile switches Drum : DBK Universal Acrylic drum of 300mm dia. Dimension : 220W x 250D x 280mmHt.Accessories : Universal Acrylic Drum
View Complete details
Yes! I am InterestedRequest a call back
Digital Metabolic Shaker
Get Best Quote
Rs 59000 / PiecePrice on Request
| Voltage | 220 V |
| Display Type | Digital |
| Operation Type | Timed Operation |
| Frequency | 50 Hz |
| Material | Mild Steel |
| Is It Portable | Portable |
| Country of Origin | Made in India |
The Metabolic Shaker is reciprocating action shaker in which platform on shaker makes a back and forth motion. This shaker is used for clinical and chemical investigations, dye manufacturing, microbiological research. The metabolic shaker body is made up of M. S. duly powder coated and the tray made up of S. S. Trays is interchangeable as per number of conical flasks. Shaking speed is adjustable from 20 to 200 strokes per minutes. Stroke length is 40 mm Variable speed and reciprocating stroke gives gentle agitation to vigorous mixing. It has the following features:
Features:
•Capacity: 250 ml. x 9 conical flasks
•Speed: 20 to 200 RPM adjustable
•Stroke Leng: 40 mm
•Dimension: 480 mm W x 480 mm D x 220 mm H
Features:
•Capacity: 250 ml. x 9 conical flasks
•Speed: 20 to 200 RPM adjustable
•Stroke Leng: 40 mm
•Dimension: 480 mm W x 480 mm D x 220 mm H
View Complete details
Yes! I am InterestedRequest a call back
EXPLORE MORE CATEGORIES
